Nikwax Rug Proof

Adds / renews water repellency and revives breathability of horse rugs

Resists water absorption due to flex & abrasion damage

Prolongs the life of gear and optimises performance in wet weather

Maintains insulation, keeping your horse warm

Treatment will reduce the growth of mildew in the rug

Easy to apply - can be used in a washing machine or applied by hand, no tumble drying required

Will not affect cosmetic appearance

WaterBased - environmentally friendly, biodegradable, non flammable, non hazardous * Does not contain fluorocarbons

For best results always clean rug first with Nikwax® Rug Wash. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

Machine Wash:

Remove all detergent build-up from the detergent dispenser.
Place clean rug in washing machine.
Use 500 ml for 1 rug. Treat 1 rug per load.
Run 30° cotton cycle.

Hand Wash (use gloves):

Use 500 ml for 1 rug, with 10 litres of hand-hot water in vessel.
Agitate to mix, push down into vessel so that whole rug is immersed.
Add a further 15 litres of warm water to cover rug and agitate.
Leave to soak for 2 hours, agitating occasionally.
Rinse in cold water until water runs clear.

Sponge Application (use gloves):

Spread clean rug on clean area and wet thoroughly with a hose.
Use 500 ml for 1 rug, with 1.5 litres of hand-hot water.
Using a new sponge apply solution to rug, working into fabric and seams.
Use any surplus on back area of rug, leave for 5-10 minutes.
Rinse in cold water until water runs clear.

Drying:

Air dry or tumble dry on a low setting if care label allows.